Idex Capillary Polymer Tubing Cutter

Capillary Polymer Tubing Cutter

The Upchurch Scientific A-350 Cutter is designed to cut capillarysized polymer tubing. The cutter makes clean, perpendicular cuts without collapsing thin capillary walls. A set of ten tubing sleeves, required for cutting, are included with each cutter, along with five replacement blades. The included tubing sleeves are for cutting 360 μm OD polymer capillary tubing. Alternative sleeves are available for cutting 510 μm and 1/32” OD tubing. All tubing sleeves are 2” long and are made of DuPont® FEP.

 

NOTE:

  • The A-350 Capillary Polymer Tubing Cutter can be used to cut tubing OD sizes other than 360 μm, 510 μm and 1/32”. Simply use the proper NanoTight™ Tubing Sleeve found on page 17. Please note, however, that these sleeves are shorter than those listed on this page, and therefore will last through fewer cuts.
  • Our tubing cutters are material specific: the A-327, A-329 and A-350 should only be used to cut polymer tubing, where as the FS-315 should only be used to cut fused silica tubing.

 

Serial Number

Description

A-350

Tube Cutter Capillary Polymer

 

 

Share