Idex General Use Inlet Solvent Filters

General Use Inlet Solvent Filters

 

  • Large surface areas prevent pump cavitation
  • Disposable
  • 2 μm, 10 μm, and 20 μm pore sizes available
  • General use and prep filters for higher flow applications

 

It is good practice to filter your solvents to prevent pump damage. Upchurch Scientific® 316 stainless steel filters provide that protection.

Because filters should be changed periodically, we make it easy to replace them without tools. For those filters using a plastic fitting, the tubing can be reconnected by finger tightening the fitting into the new filter. The filters with stems allow easy insertion into the inlet tubing.

 

Application NOTE:

 

Why Use An Inlet Solvent Filter?

  • To filter out particulate matter from the solvent that may otherwise damage expensive hardware. (Use a 10 μm or 20 μm version for this purpose. The A-309 and A-230A filters have an added “Bottom of the Bottle™” feature to help draw solvent to within 1/8” of the bottom of your solvent bottle.)
  • To prevent particulates originating from the sparging system from entering the mobile phase reservoir and to help disperse the sparging gas efficiently. (Use a 2 μm filter for this purpose.)
  • To hold your tubing in place at the bottom of the bottle. (Most stainless steel filter options work best for this purpose.)
  • Important Note: It is usually a good idea to change the inlet filter as part of your semi-annual or annual preventative maintenance program.

 

Serial No:

Description

A-200

Inlet Solvent Filter Kit 10µm, for 1/8" OD

A-201

Inlet Solvent Filter Kit 2µm, for 1/4" OD

A-220

Inlet Solvent Filter 10µm, for 1/8" OD Single

A-221

Inlet Solvent Filter 10µm, for 1/8" OD 5 Pack

A-222

Inlet Solvent Filter 2µm, for 1/8" OD Single

A-223

Inlet Solvent Filter 2µm, for 1/8" OD 5 Pack

A-225

Inlet Solvent Filter 20µm, for 1/16" ID

A-226A

Inlet Solvent Filter 10µm, for 5/16" OD

A-227A

Inlet Solvent Filter 10µm, for 1/4" OD

A-228

Inlet Solvent Filter 2µm, for 1/8" ID

A-230A

Inlet Solvent Filter 20µm, for 1/4' OD

A-231A

Inlet Solvent Filter 20µm, for 3/16" OD

A-240

Inlet Solvent Filter 10µm, for 1/8" OD Single

A-241

Inlet Solvent Filter 10µm, for 1/8" OD 5 Pack with Fittings

A-242

Inlet Solvent Filter 2µm, for 1/8" OD

A-302

Inlet Solvent Filter 10µm, for 1/16" ID

A-302A

Inlet Solvent Filter 10µm, for 1/8" OD

A-310

Inlet Solvent Filter - Waters Type 10µm, 1/8" ID

A-311

Inlet Solvent Prep Filter 10µm, 1/16" OD

A-426

Solvent Filter UHMWPE 10µm

A-427

5 Pack

 

 

Share