Idex Inline Micro Filters

Inline MicroFilters

 

  • 100% biocompatible PEEK™ polymer option available
  • As low as 109 nL void volume
  • Two versions: direct connect 1/32” OD tubing or use MicroTight® tubing sleeves for 70 – 520 μm OD capillary tubing

 

Upchurch Scientific® Inline MicroFilters protect your column from particles originating in the mobile phase or sample, or from pump seal and sample injection valve wear. These filters have a 0.006” (150 μm) thru-hole. Choose the M-520 with a 0.5 μm 100% PEEK frit or the M-135 1 μm stainless steel filtering screen version, to connect to capillary tubing using the MicroTight tubing sleeves. You may also directly connect 1/32” OD tubing using the M-525 which contains a 0.5 μm PEEK frit.

 

 

NOTE:

  • The Mini MicroFilter and Inline MicroFilter can be used to pack capillary tubing. Simply place one of these filters on the effluent side of the capillary tubing, then slurry pack. Once packed, place a filter at the head of the tubing. This creates a reliable capillary column without fusing the silica to make frits or pressing filter paper inside the capillary tubing.

 

Serial Number

Description

M-120

Filter End Fitting 0.5µm PEEK for MicroTight Tubing Sleeve Single

M-120X

Filter End Fitting 0.5µm PEEK for MicroTight Tubing Sleeve 10 Pack

M-135-1

Inline MicroFilter Assembly 1µm, Stainless Steel- 5 Pack Single

M-140

Filter End Fitting, 0.5µm PEEK- for 1/32" OD Natural - Single

M-520

Inline MicroFilter Assembly 5 Fittings

M-525

Inline MicroFilter Kit PEEK 0.5µm

 

 

Share