PEEK Bottom-of-the-Bottle Solvent Filters
These biocompatible filters are made from 100% PEEK polymer, including the two built-in PEEK frits. The bottom frit (2 μm or 10 μm) will draw solvents from within 0.080” (2.0 mm) of the bottom of the solvent bottle. The 2 μm frit on the side may be used for a 1/8” OD helium sparging line. To use, simply press fit your appropriately sized fluoropolymer tubing firmly into the top holes. That’s it!
Serial Number |
Description |
A-435 |
Bottom-of-the-Bottle™ Filter Assembly PEEK 2µm, for 1/8" OD |
A-436 |
Bottom-of-the-Bottle™ Filter Assembly PEEK, 2µm, for 3/16" OD |
A-437 |
Bottom-of-the-Bottle™ Filter Assembly (Small Neck) PEEK 2µm, for 1/8" OD |
A-438 |
Bottom-of-the-Bottle™ Filter Assembly (Small Neck) PEEK 10µm, for 1/8" OD |
A-440 |
Bottom-of-the-Bottle™ Filter Assembly PEEK 10µm, for 1/8" OD |
A-441 |
Bottom-of-the-Bottle™ Filter Assembly PEEK, 10µm, for 3/16" OD |
A-445 |
Bottom-of-the-Bottle™ Solvent Filter UHMWPE, 10µm, for 1/16" OD |
A-446 |
Bottom-of-the-Bottle™ Solvent Filter UHMWPE, 10µm, for 1/8" OD |
A-450 |
Bottom-of-the-Bottle™ Filter Assembly PEEK 2µm, for 1/16" OD |
A-451 |
Bottom-of-the-Bottle™ Filter Assembly PEEK, 10µm, for 1/16" OD |