Idex Two-Piece SealTight Fingertight Fittings

IDEX

Qty :

Two-Piece SealTight™ Fingertight Fittings

Several nut lengths and head styles to fit into a variety of applications
Designed to connect 1/16” OD tubing to 10-32 coned ports
Hold up to 9,000 psi (620 bar)

The dual compression created by the specially designed nut and ferrule enables the Upchurch Scientific® SealTight Fittings system to outperform standard finger tightened fittings. The forward cone of the SealTight Ferrule provides gripping power and a leak-free seal via conventional compression by the receiving port. The slotted end creates the second compression zone in conjunction with a SealTight Nut. All SealTight Nuts are for use with 1/16” OD tubing and are designed to be used with the F-192 Ferrule. A wide variety of fitting head styles are available for various space constraints. This fittings system is also interchangeable with the Two-Piece RheFlex Fittings System for 1/16” OD tubing, shown on the previous page.

NOTE:

Overtightening these fittings on fluoropolymer (e.g., FEP, PFA and ETFE) tubing can cause the ID of your tubing to collapse.

Serial Number	Description
F-192	SealTight™ Ferrule 10-32-M6 Coned, for 1/16" OD Single
F-192X	SealTight™ Ferrule 10-32-M6 Coned, for 1/16" OD 10 Pack
F-193	SealTight™ Fitting Short Hex-head , 10-32 Coned, for 1/16" OD
F-195	SealTight™ Fitting, Short 10-32 Coned, for 1/16" OD Single
F-195X	SealTight™ Fitting, Short 10-32 Coned, for 1/16" OD 10 Pack
F-196	SealTight™ Fitting, Long 10-32 Coned, for 1/16" OD
F-197	SealTight™ Fitting, M6 Coned, for 1/16" OD Single
F-287	SealTight™ PEEK Fat-Head, 10-32 Coned, for 1/16" OD
F-350	SealTight™ Stainless Steel FlushNut™ 10-32 Coned, for 1/16" OD